Thick-Wall & Large-Diameter Forged xem bong da truc tiep Tube Hollows

Chalco manufacturesforged xem bong da truc tiep tube hollowsandbored-from-solid tube shellsforlarge-diameterandthick-wallapplications requiring high structural integrity.

The forging route delivers a dense, uniform microstructure and tight concentricity for critical load-bearing parts. Typical grades include6061, 7075, 7050.

• Thick-wall & large-diameter capability
• Forged hollows & bored-from-solid route
• Tight concentricity; UT/RT available
• Heat-treat ready (e.g., T6/T651)
• Cut-to-length; responsive lead times

At a glance:OD Ø20–Ø800 mm · Wall ≥5 mm · Length up to 1500 mm · Tolerance (as forged/machined) up to ±0.5 mm · UT/RT on request

Also available: titanium and steel forged hollows — see dedicated pages. This page focuses on forgedxem bong da truc tieptube hollows for thick-wall/large-diameter needs.

Manufacturing Routes for Thick-Wall & Large-Diameter xem bong da truc tiep Tubes

Forged Hollows / Bored-from-Solid— preferred when sections are oversize or ultra-thick and higher structural integrity is required. The forged route delivers a dense microstructure and allows concentricity control via deep-hole boring; UT/RT is available on request.

Seamless / Drawn (comparison)— common route for mainstream OD/wall ranges with faster supply. For oversized sections or higher reliability requirements, Chalco recommendsforged xem bong da truc tiep hollows(this page).

xem bong da truc tiep Forged Hollow Types Supplied by Chalco

Forged xem bong da truc tiep Pipe Fittings (Related Components)

Chalco supplies forging-gradexem bong da truc tiepfittings matched to forged xem bong da truc tiep tube hollows for high-pressure assemblies. Standards: ASME B16.9 / MSS-SP / GB/T / EN. Delivery: blank, rough-machined, or finish-machined with inspection documents (e.g., UT, material certs) on request.

Also available:end caps, unions/couplings, crosses and 180° elbows, supplied on request to match alloy/temper.

xem bong da truc tiep Alloys & Tempers for Forged Tube Hollows

Chalco supplies forgedxem bong da truc tieptube hollows and bored-from-solid tube shells for thick-wall and large-diameter applications. Alloy selection balances strength, corrosion resistance and heat-treat response for critical, load-bearing parts.

Core xem bong da truc tiep Grades

• Dense forged microstructure; improved fatigue/impact performance
• Concentricity control after deep-hole boring;UT/RTon request
• Heat-treat ready where applicable (e.g.,T6/T651)
• Consistent ID/OD and wall for precision assemblies

6061 forged xem bong da truc tiep tube hollow

7075 forged xem bong da truc tiep tube hollow

5083 forged xem bong da truc tiep tube hollow

Also supplied on request: 7050(SCC-resistant, thick sections),2024(fatigue strength),2219(high-temperature/weldable),6082, 7475. Tempers vary by alloy and drawing/specification.

Capabilities & Quality — Thick-Wall & Large-Diameter Forged xem bong da truc tiep Tube Hollows

Chalco manufactures forgedxem bong da truc tieptube hollows andbored-from-solidtube shells forthick-wallandlarge-diameterapplications, with controlledconcentricityand documented quality for critical, load-bearing parts.

Processing Capability & Range

• OD window:Ø20–Ø800mm
• Wall:≥5mm (per drawing/route)
• Length:up to 1500mm (material/route dependent)
• Concentricity control:deep-hole drilling/boring → finish machining
• Heat treatment:T6 / T651 / T74 / T76 (by alloy/spec)
• Machined tolerance:up to ±0.5 mm (tighter on request;CNC finish-turning ±0.05 mm ID)

Quality Control & Documentation

• Standards:ASTM / ASME / EN / GB / MIL (per PO)
• NDT:UT / RT on request; hardness & mechanical tests as specified
• Reports:material certs; heat-treat & dimensional reports
• Traceability:heat-number tracking; process records retained
• Packing:export packing with ID/OD protection

For a fast quote, include:Alloy/Temper · OD/ID/Wall · Length · Qty · Drawing/Tolerances · NDT (UT/RT).

Typical Applications — Forged xem bong da truc tiep Tube Hollows

Chalco suppliesforged xem bong da truc tiep tube hollowsandbored-from-solidtube shells forthick-wall, large-diameterassemblies that require dense structure,concentricity control, and documentedUT/RT.

Aerospace — Actuators, Housings, Structural Tube Shells

Forged xem bong da truc tiep hollows withdeep-hole boringand finish machining for high-load actuators and airframe interfaces. Typical grades:7075 / 7050 / 6061; tempers such asT6/T651.

• Thick-wall, large-OD tube shells; tight concentricity
• UT/RT on request; dimensional & heat-treat reports
• Ready for anodizing / protective finishes

Defense & Military — Load-Bearing Tube Shells

High-strengthforged xem bong da truc tiep hollowsfor impact/vibration environments andlarge-OD actuator housings; deep-hole boredIDs ensure alignment in precision mounts and motion systems. Typical grades:7075 / 7050.

• Large-OD, thick-wall; machined tolerance up to ±0.5mm
• Traceable batches; UT/RT and hardness/mechanical tests
• Finish machining for straightness/runout targets

Rail & Marine — Cooling/Brake Modules, Corrosion-Resistant Shells

5083 / 6061forged hollows for seawater and high-vibration service; weld-free tube shells improve fatigue life. Concentricity and surface finish tailored to assembly fit.

• Corrosion-resistant alloys; stable machining behavior
• Thick-wall hollows for cooling/brake modules
• Optional surface treatments; protected export packing

Also supported on request:power & thermal equipment, chemical systems, and other special environments requiringthick-wall, large-diameterforged xem bong da truc tiep hollows withUT/RTand heat-treat documentation.

Fast Quote:please include Alloy/Temper · OD/ID/Wall · Length · Qty · Drawing/Tolerances · NDT (UT/RT).

"The 7050 hollows passed UT Level B first time. Delivered in 16 days.” – US aerospace client

Frequently Asked Questions (Forged xem bong da truc tiep Tube Hollows)

Q1 – Can Chalco machine non-standard IDs or custom shapes?

Yes. Drawings for square/oval hollows, multi-interface sections, or extreme wall ratios are welcome. Deep-hole boring and finish machining achieve concentricity targets.

Q2 – Which xem bong da truc tiep alloys are most requested?

Core grades:6061, 7075, 7050, 5083. Others such as 2024, 2219, 6082, 7475 and 7050 series are supplied on request.

Q3 – Typical lead time?

Standard forged xem bong da truc tiep hollows:10–20 days. Large-OD or high-strength grades:20–30 days. Expedite slots are available—advise your deadline when sending RFQ.

Q4 – What inspection documents are included?

Chalco provides dimensional report and material cert as default.UT/RT, hardness and mechanical tests, or third-party witness (SGS, BV, TÜV) can be added per PO.

Q5 – Minimum order quantity?

Prototype orders start from1 piecefor proof-of-concept or qualification.

Q6 – Can parts follow ASTM / ASME / EN or customer specs?

Yes. Processing, heat treatment and inspection can align with ASTM B247, AMS-QQ-A-367, EN 485 or customer drawings.