Why braze aluminum to copper?

Brazing creates a metallurgical bond at lower temperatures than welding, preserving material properties and enabling strong joints between dissimilar metals like aluminum and copper, widely used in HVAC/R, electrical busbars, and battery modules.

What are the key parameters for brazing aluminum to copper?

Choose a filler metal with a melting range below aluminum (660 °C) and copper (1085 °C), typically 450–600 °C alloys (e.g., Al‑Si, Zn‑Al). Ensure clean, oxide‑free surfaces and use a flux based on ammonium fluoride or chloride.

How to select the right filler metal?

Consider filler type (Al‑Si, Zn‑Al, Super Alloy, etc.), melting point, wetting ability, flux compatibility, joint strength, conductivity, corrosion resistance, and application environment.

What are typical filler alloys used?

Common fillers include aluminum‑silicon alloys (Al‑Si 12 / AA4047) for heat exchangers, zinc‑aluminum alloys (e.g., ZnAl15, ZnAl22) for low‑voltage connections, Super Alloy No.1 for high‑pressure HVAC circuits, and Sn‑Zn or Sn‑Pb alloys for electronics or light‑duty joints.

What are common issues and solutions in aluminum–copper brazing?

Key issues include overheating (avoid melting base metals), poor wetting (adjust temperature and gap), porosity (control airflow and heating), and galvanic corrosion (use coatings or isolation).

What best practices ensure safety during brazing?

Ensure proper ventilation, wear protective gear (gloves, goggles, flame‑resistant clothing), use fume extraction, remove flammables, maintain cooling zones, clean flux residues, inspect joints, and apply corrosion protection coatings.

truc tiep bong da hd to Copper Brazing Rods | Chalco truc tiep bong da hd

Chalco's truc tiep bong da hd to copper brazing rods are made from low-melting truc tiep bong da hd-zinc alloy with a narrow melting range.

They are optimized for truc tiep bong da hd brazing and offer excellent wetting due to higher zinc content. The filler flows smoothly and forms strong, gap-free joints.

Each rod includes a non-corrosive flux core, eliminating the need for additional flux.

truc tiep bong da hd to copper brazing rods specifications

Complies with AWS A5.8, AS 9100 and EN ISO 17672.

Certified under IATF 16949, RoHS 2011/65/EU, REACH EC No. 1907/2006, and ISO 9001:2015.

We provide mill test certificates, free samples, and MSDS documents.

Third-party inspection and factory audit support are available to ensure product quality and buyer confidence.

Instant Quote

Recommended truc tiep bong da hd to copper brazing alloys

We offer a range of brazing alloys for truc tiep bong da hd to copper joining, including popular grades like AL 822, AL 718, 4045, 4047, and AlSi10Cu4.

These alloys meet the strength, thermal conductivity, and environmental standards required in HVAC, automotive, and electronics industries.

Recommended brazing temperature: 950–1000°F (510–537°C)
Appearance: Silver color with white flux core
Packaging: truc tiep bong da hd to copper brazing rods, packed in sets of 5 or 8 (custom packaging available)
Rod length: 8 inches, 18 inches (8" rods fit conveniently in repair kits)

With cesium-based flux or flux-cored design

AL 822 Aluminum Brazing bong da truc tiep hom nay |

Low melting point and easy to use. No post-cleaning required. Ideal for HVAC and repair applications where fast and reliable truc tiep bong da hd-to-copper brazing is needed.
AL 718 truc tiep bong da hd Brazing Rods with Flux

Excellent flow characteristics. Perfect for brazing truc tiep bong da hd-to-copper joints in thin-walled or precision parts, improving both efficiency and appearance.

Without cesium-based flux, external flux required

AL 34

A high-strength brazing alloy designed for truc tiep bong da hd-to-copper joints in automotive cooling systems. Delivers durability and structural integrity.
4045 Brazing Rod

High silicon content with excellent wetting properties. Suitable for large surface area applications and joints requiring efficient heat transfer.
ER4047 truc tiep

Superior flowability. Ideal for filling complex joints and repairing microcracks in truc tiep bong da hd-to-copper brazed areas.
Sil-Fos-Al

A specialized alloy for stable truc tiep bong da hd-to-copper brazing in electrical connectors. Offers excellent conductivity and corrosion resistance.
AlSi12Cu1 (EN standard)

European-certified alloy compatible with most brazing systems. Supports fast and reliable truc tiep bong da hd-to-copper assembly.
AlSi10Cu4 (EN standard)

Offers high thermal conductivity and mechanical strength. A reliable solution for copper-to-truc tiep bong da hd brazing in heat exchangers and pressure systems.

truc tiep bong da hd to copper brazing rods performance

With a low melting range and optimized truc tiep bong da hd-zinc alloy, our brazing rods ensure strong, corrosion-resistant joints and smooth wetting for truc tiep bong da hd-to-copper applications in HVAC and auto repairs.

To achieve ideal capillary joints, ensure tight fit-up between parts and keep the heat treatment temperature below the alloy's solidus.

Instant Quote

Composition	Range
Zi (Zinc)	Balance
Al (truc tiep bong da hd)	22.00% ± 1.0
Other Elements, Total	0.15% Max
Solidus	826°F (441°C)
Liquidus	905°F (471°C)
Recommended Brazing Temperature	950-1000°F (510-537°C)
Density (Lbs/in3)	0.19

truc tiep bong da hd to copper brazing rods advantages

Low-temperature brazing that protects base metals

Reduces thermal stress and prevents burn-through—ideal for thin-walled and precision parts.

High-strength joints with corrosion resistance

Forms reliable bonds with excellent sealing, heat cycle stability, and resistance to galvanic corrosion.

Excellent wetting and smoother brazing

Fills tight gaps smoothly for clean, consistent joints with low risk of voids.

Compatible with multiple brazing methods

Supports various heat sources; flux-cored options simplify operation—no extra flux needed.

Eco-friendly and regulation compliant

Meets RoHS/REACH standards. Full documentation and third-party inspection supported.

Cost-effective with better value

Lower cost than welding, with high efficiency—perfect for production or field repairs.

truc tiep bong da hd

truc tiep bong da hd to copper brazing rods applications

Our truc tiep bong da hd to copper brazing rods are widely used in HVAC/R systems, automotive manufacturing, and electrical connections.

They are suitable for joining all brazable grades of truc tiep bong da hd and copper, as well as brass and other metals—especially in applications requiring high strength, conductivity, and sealing performance.

Instant Quote

HVAC systems

Used for brazing copper tubes to truc tiep bong da hd fins, distributors, and headers in air conditioners, heat pumps, and refrigeration systems.

Refrigeration truc tiep bong da hd cooling equipment

Refrigeration and cooling equipment

Ideal for connecting truc tiep bong da hd evaporators to copper lines and servicing commercial coolers, ice makers, and display cabinets.

Aerospace

Applied in conductive truc tiep bong da hd-to-copper joints for lightweight structures, including busbars and cooling systems in aircraft, satellites, and drones.

Marine truc tiep bong da hd offshore engineering

Marine and offshore engineering

Used in HVAC and electrical systems on ships and offshore platforms, ensuring corrosion-resistant joints between truc tiep bong da hd housings and copper/brass terminals.

Automotive industry

Suitable for brazing truc tiep bong da hd heat exchangers to copper fittings and joining truc tiep bong da hd-copper pipes in EV battery cooling systems.

Electrical connections truc tiep bong da hd cable terminals

Electrical connections and cable terminals

Used for brazing or pre-coating truc tiep bong da hd cable lugs, truc tiep bong da hd-to-copper splices, and joints with copper, brass, or plated terminals.

Partners and customer success stories

Over the years, our truc tiep bong da hd to copper brazing rods have been widely used in the production lines and service systems of leading global brands in HVAC, refrigeration, and automotive manufacturing.

Trusted by both OEMs and aftermarket service providers, our products have earned a strong reputation for reliability and performance.

We supply customized truc tiep bong da hd to copper brazing rods to Daikin Industries, Ltd., one of Japan's top air conditioning manufacturers.

These rods are used extensively in Daikin's R32 refrigerant-based systems, especially for joining internal copper tubes and truc tiep bong da hd fins.

The filler metal features a low melting point, excellent flow characteristics, and a non-corrosive, eco-friendly design—meeting Daikin's technical demands for energy efficiency, lightweight construction, and sustainable refrigeration systems.

The product is now steadily supplied to Daikin's factories in Japan, China, and Vietnam, supporting efficient mass production and cost control.

Instant Quote

Daiktruc tiep bong da hd air conditioner

Services provided by Chalco

Custom alloy and packaging solutions

We tailor alloy composition, rod length, flux type, and packaging according to your process needs. OEM/ODM services are available to support brand customization.

Technical support and welding solutions

We offer guidance on brazing methods, temperature control, and process optimization. Sample testing and welding trial analysis are available upon request.

Flexible packaging and fast delivery

Available in 5-stick, 8-stick, or bulk packaging, with optional custom labels. Large inventory ensures fast delivery within 7 days. Supports both LCL and FCL shipments.

Complete compliance documentation

We provide MSDS, RoHS, REACH, ISO 9001 certifications, along with mill test certificates, chemical composition reports, and third-party test support.

Factory audit & third-party inspection support

We welcome audits and inspections from SGS, BV, TUV, and other organizations. Transparent supply chain to meet corporate compliance standards.

Multilingual support and dedicated project service

Bilingual communication (Chinese & English) with support across North America, Europe, Southeast Asia, and the Middle East. A dedicated account manager ensures seamless coordination from selection to delivery.

Post-braze cleaning

After brazing, the cesium-based flux leaves non-hygroscopic and non-corrosive residues. In most cases, no additional cleaning is required, and the parts can proceed directly to assembly or use.

If cleaning is necessary, a 50/50 mixture of nitric acid and distilled water can be used to treat the brazed area. Submerging the part in the solution and gently agitating it helps remove any remaining flux residue.

Note: Perform cleaning in a well-ventilated area and use protective gloves, goggles, and appropriate safety equipment.

Properties of brazed joints

The performance of a brazed joint depends on several factors, including the mechanical properties of the base metals, joint design, and metallurgical compatibility between the base and filler materials.

For truc tiep bong da hd brazing, a joint clearance of 0.003–0.006 inches (0.076–0.152 mm) per side is recommended to promote optimal capillary action and joint strength.

Compared to typical low-temperature brazing or soldering alloys, the higher zinc content in Al-Cop Braze can significantly enhance joint strength when proper design conditions are met.

Warranty & Storage

When stored in its original, unopened container, the product remains valid for 90 days from the date of shipment.

Ideal storage conditions include a temperature range of 65–75°F (18–24°C) in a clean and dry environment.

If separation of brazing paste occurs, it may require remixing to ensure uniform consistency.

It is important to note that if no issues are encountered, the product can typically be used beyond the 90-day period under proper storage.

For flux-cored wires, when stored under appropriate conditions, full functionality is maintained for up to 2 years.

Safety information

The operation and maintenance of brazing equipment and facilities should comply with ANSI Z49.1 – Safety in Welding, Cutting, and Allied Processes.

How to braze copper to truc tiep bong da hd (quick guide)

Clean both surfaces thoroughly
Use a proper filler rod (e.g., AL 822 with flux core)
Heat the joint evenly, focusing more on copper
Feed the rod once truc tiep bong da hd reaches ~950°F (510°C)
Let it cool naturally—no cleaning needed if flux-cored

For step-by-step instructions, check our full blog on how to braze copper to truc tiep bong da hd.

Brazing xem bong da truc tiep hom nay to Copper
Copper to truc tiep bong da hd brazing made simple—with the right rod and heat.

We maintain long-term partnerships with major clients, including leading Japanese air conditioning brands, Korean automotive heat exchanger manufacturers, and HVAC engineering companies in Europe and North America.

Our products have been exported to regions such as North America, Europe, Japan, Korea, Southeast Asia, the Middle East, and South America.